DAAB DB409, Инструкция по эксплуатации

Страница: 10 / 12

10
DAAB INTERFACE CARD DB409 INSTRUCTION MANUAL
10 Revision 7
Channel list, Frequency converter, F-channels
No. Name Range Factory Setting
F001 Communication with frequency converter 0 - 1 1
0 Communication disabled
1 Communication activated
F002 Acceleration time from closed position
motor 1 and 2 (from 0-100Hz)
0.5-9.9 seconds 2.0
F003 Acceleration time in all movements except at
closed position motor 1 and 2 (from 0-100Hz)
0.5-9.9 seconds 4.0
F004 Acceleration time when P500 is set to 2 and the
input is activated, battery backup
5.0-12.0 seconds 7.0
F005 Retardation time with limit switch and change of
direction for motor 1 and 2 (from 100-0Hz)
0.5-9.9 seconds 4.0
F006 Retardation time with photocell and vehicle loops
for motor 1 and 2 (from 100-0Hz)
0.5-9.9 seconds 2.0
F008 Low-speed frequency for opening movement,
motor 1 and 2
5-20 Hz 5
F009 Low-speed frequency for closing movement,
motor 1 and 2
5-20 Hz 10
F012 Opening frequency / Opening speed for motor 1 21-99 Hz 50
F013 Closing frequency / Closing speed for motor 1 21-99 Hz 30
F014* Number of degrees with low-speed frequency
before open position for motor 1
0-60 degrees 0
F015* Number of degrees with low-speed frequency
before closed position for motor 1
0-60 degrees 0
F022 Opening frequency / Opening speed for motor 2 21-99 Hz 50
F023 Closing frequency / Closing speed for motor 2 21-99 Hz 30
F024* Number of degrees with low-speed frequency
before open position for motor 2
0-60 degrees 0
F025* Number of degrees with low-speed frequency
before closed position for motor 2
0-60 degrees 0
* = Shown only when L001 and/or L002 are set to 1 encoder or 4, hold-to-run without limit switch.
F-channels are shown only when C2020=4, frequency converter.