Interfaces
1. USB interface
;
2. RJ45 interface
(Ethernet)
; 3.HDMI input;
4. Power port;
5.
On/Off
b
utton
.
Note: Please pull out the power plug before installing or disassembling the unit!
Steps of Installation
1.
Open the top cover as shown in Fig. 2;
2.
Remove EPE on both sides of the box as shown in Fig. 3;
3.
Take out the base as shown in Fig. 4;
4.
Lift out the unit as shown in Fig. 5 and put it on the mounting table (avoid scratching) (Fig. 6);
5.
Tighten the base
onto the
unit with dedicated screws
and
hex socket wrench as shown in Fig.
6.
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
Mounting table Mounted state
(Fig. 6)
(Fig. 7)
6
