6
Unit placement and lighting
⚫
To use the unit as an interactive table, make sure there’s enough room around the unit on all sides so
that the unit can operate safely and provide users the best experience.
⚫
Keep all the cables out of the way of people and properly route the cables around the unit to prevent
damages and injuries.
⚫
The digital panel requires air circulating through its interior to prevent overheating when it is turned on.
Make sure the air vent inlets and outlets are not blocked.
⚫
Set up proper level of lights around the unit. Avoid using direct light which could cause glare, reflection
or interfere with the display:
Interactive Table:
DO NOT place the unit near the window
so that the display surface is exposed to
sunlight from the outside. Use blinds or
shades to block the sunlight if possible.
Avoid having any indoor light source
shining directly onto the display surface.
Place the interactive table where
indirect lighting is used.
Wall Mount Digital Sign:
DO NOT mount the display panel facing
any window that it causes exposure to
sunlight from the outside. Use window
blinds or pick a wall that doesn’t have
direct sunlight shines onto.
Avoid having any indoor light source
shining directly onto the display surface.
Mount the display panel where indirect
lighting is used.
