OPERATION
G-Sensor Calibration
G-Sensor Calibration is needed after installing the BX4000.
It detects the installed direction of the BX4000 for it to accurately record the
journey direction
journey direction.
Press and hold [PANIC] & [SHUTTER] button together and then power on.
G-Sensor Calibration screen will be displayed.
Press
and
hold
panic
and
shutter
button
simultaneously more than 2 sec for calibration
simultaneously
more
than
2
sec
for
calibration
Press
any
single
button
to
escape
P k hi l
fl
f
i h
Park
vehicle
on
a
flat
surface
with
at
least
50
meters
of
space
directly
ahead
and
press
panic
button
once
Move
directly
forward
and
accelerate
vehicle
till
beep
sound
occur
Retry
G
‐
Sensor
Calibration
is
finished
successfully
Press
any
button
or
wait
30
seconds
to
reboot
G
‐
Sensor
Calibration
is
failed
Park
vehicle
on
a
flat
surface
with
At
least
5
meters
of
space
directly
ahead
And
press
panic
button
once
again
14
This G-Sensor calibration is only needed at the first time the BX4000 is used.
OPERATION
PANIC RECORD BY PANIC BUTTON
The panic recording by [PANIC] button will start by pressing the [PANIC] button
with one short “Beep” sound. Blue LED will be blinking during the panic
recording.
g
BX4000 doesn’t make a separate panic file during the continuous recording.
It will mark the panic area by [PANIC] button in the continuous recording file
which can be easily searched for during playback.
SNAPSHOT RECORD BY SHUTTER BUTTON
Press [SHUTTER] button.
Then BX4000 will take a snapshot of 1 image with 5seconds audio with one
short “Beep” sound.
p
15
14
15
