FUNCTION (MAIN UNIT)
Automatic start
Automatic start
Make sure that peripherals include cameras are properly connected.
Turn on the vehicle power, BX4000 will be automatically started. (Use the
power cable provided.)
Notice : The unit will not start recording immediately after the power is
Event record
The Event recording will be started automatically by Motion detection Alarm1 to
g
y
p
turned on. It takes around 1 minute for the built-in power backup system
to charge. Thereafter, the internal flash memory will be ready to record.
The Event recording will be started automatically by Motion detection, Alarm1 to
3 or by the G-sensor level.
The Panic recording can be started by pressing the [PANIC] button.
Normal record (Continuous record)
The Normal(continuous) recording will be automatically started after power on.
(
)
g
y
p
BX4000 will not make a separate event file during the continuous recording.
It will mark the Event area as ‘Alarm1~3’, G-senor, Motion detection or [PANIC]
button in the continuous recording file, which can be easily searched for during
playback.
Dual record (Event & Normal record)
If you set different record modes per camera, like camera1 set as Event record
and camera2 set as Normal record, then camera1(Event record) will work
according to the record setting for example 10frames per second recording.
However camera2(Normal record)will record 1frame per second, if there is no
event. If there is an Event, both cameras will record according to the record
Live screen on Monitor
BX4000 will display the live screen on the monitor.
The camera channel can be changed using the information OSD.
setting for example 10 frames per second recording.
(Refer to page 13)
Playback in the car
Recorded files can be played back in the car.
PC Vi
S ft
10
PC Viewer Software
The software is pre-loaded on the SD card [pcsw] folder.
FUNCTION (MAIN UNIT)
SD Memory Card Format
Remove the power first. Press and hold the [PLAYBACK] & [PANIC] button.
Then connect the power.
Press and hold the [PLAYBACK] & [PANIC] more than 2seconds after
booting. Then SD card initialization will start.
booting. Then SD card initialization will start.
Once complete, all video & log files will be deleted and the configurations
will default to the factory settings.
Notice : PC Viewer software is pre-loaded on the SD card. Please ensure
you have installed the software to your PC before you format the card.
Built-in power backup (Super Capacitor)
When power to the unit is interrupted, BX4000 creates the last file using the
internal Super Capacitor.
BLUE LED (RECORD)
The blue LED shows the power is on.
The blue LED blink during event recording.
RED LED (Overwriting)
RED LED (Overwriting)
The red LED will be turned on when start overwriting.
Buzzer
“Beep” sound will occur when event/panic recording starts (this can be turned off
Beep sound will occur when event/panic recording starts (this can be turned off
In the setting menu on the PC viewer, if required).
This also signals any system error.
VIDEO LOSS (warning)
“B
”
d ill
ti
l
h
id
l
“Beep” sound will occur continuously when video loss.
Check the camera and camera connection and turn off and on the unit to solve it.
And make sure the number of cameras that you connect before turn on the unit.
The number of cameras can be set in the settings menu on the PC viewer.
11
10
11
