![D-tect Systems rad-DX Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/d-tect-systems/rad-dx/rad-dx_installation-and-operating-instructions-manual_3087905012.webp)
V019231_14_Rad-DX_Manual.docx
Page 12 of 19
4
Turning Off the Rad-DX
There are three ways to turn off or “Power Cycle” the Rad-DX. The first way is to simply
unplug the power cable and allow the backup battery to die.
The second method is to insert a small paper clip into the small hole located on the back of the
device. If the power cable is unplugged then the device will turn off. If the power cable is still
connected, then the device will power cycle and turn back on.
The third method is to press and hold the battery icon located in the upper left-hand corner of the
LCD screen for about 10 seconds, or until the device powers off. If the power cable is
unplugged, then the device will turn off. If the power cable is still connected, then the device
will power cycle and turn back on.
Note:
This method requires that the device have firmware version 265 or higher.
Figure 8: Press and Hold the Battery Icon to Turn Off
Battery Icon