D.T.Systems RedHead RH Pro 1000, Руководство пользователя

Страница: 15 / 24

15
To Test the Electronic Stimulation:
1. Place the tester firmly on the contacts
of the Collar Receiver.
2. Set the intensity (note - an intensity
level setting of 4 or less might not be
enough to light the tester).
3. Push the N or C button.
4. The tester light will quickly flash once when the N
(Nick) button is pushed and light repeatedly when
the C (Continuous) button is pushed (the test light
will be brighter at higher intensity levels).
To Test the Vibration:
1. Press V button on the transmitter and the collar unit
will vibrate only.
Before testing, make sure that both units are fully
charged and the power to the Collar Receiver is “ON”.
TESTING
NOTE:
If the collar unit is not responding to any signals
from the transmitter, the collar may need to be repro-
grammed to the transmitter (see
page 16 ).