10
Intensity Selection Dial
The intensity selection dial allows
you to choose between sixteen
different levels of stimulation,
allowing for very precise control.
INTENSITY LEVEL
The first and most important step in training your dog with
your EZT Training System is the determination of the
correct Intensity Level to provide the proper training
stimulation without over shocking your dog.
To do this place the Collar on the dog’s neck and turn it
on. Place the Intensity Selection dial so that the System is
set on Level One. Press either the NICK or the STIMU
Button. Increase the Intensity Level in increments of one
until the dog is feeling the stimulation. You should be
able to tell when the dog is feeling the shock by the out-
ward signs of discomfort or confusion on it’s face. At this
point, increase the Intensity Level by one or two. This
should be your dog’s ideal training level. (Note: Some
dog’s may require more or less stimulation depending
upon their individual nature or size.)
TRAINING INTENSITY LEVEL
11
Transmitter Indicator Light
When one of the push button switches on the transmitter
are pushed, the RED light will turn on to indicate that the
transmitter is being operated. When the
battery needs charging the RED light will blink once
Two or Three Dog Model Selection Switch
(EZT 1002, 1003, 2002, 2003, & 3002)
Switching between units can be controlled by moving the
toggle selection switch to the desired unit.
PARTS & FUNCTIONS CONT.
Transmitter Antenna
Be very careful when screwing the 2” antenna into the
transmitter. Hand tighten only. Over tightening could
cause damage to the antenna or the antenna mount.
Battery Charging
Jack - Transmitter
The battery charging jack is located on the side of the
transmitter. After charging is complete always close the
jack with the rubber plug to prevent foreign particles from
getting inside the unit.
Remote Training Buttons
Pressing the upper button causes the collar to administer a
Momentary Stimulation or “Nick”. Pressing the lower
button gives the Continuous Stimulation
(Vibration on EZT
3000).
