D-MAX DSC-230SI, Руководство пользователя

Страница: 40 / 48

39
<View on the monitor>
ERROR MESSAGES
Superior Speed Dome system appears error messages in wrong
operations as below:
z CAMERA MODULE ERROR – This error occurs when there is an
abnormal communication with the camera module. This
equipment makes reset automatically.
„
P/T POSITION ERROR - It is displayed a message when a pan or
tilt of a camera looses its original position. This equipment make
reset automatically.
z SORRY NOT MEMORY - It is appeared a message when a
calling a function without memory or number in an executed
commend that user already memorized as like preset, swing,
group, trace and so on. You may use to be memorized the related
functions into this equipment.
z
DETECTED LOWER VOLTAGE - It is appeared a message
if the irregular input load voltage has been supplied to the
dome in initializing or the irregular voltage has been supplied
to the dome during 30 seconds on operating. To prevent
system against serious damages by the irregular lower input
power, the dome is shut down automatically. Before turn on
the power, the user has to check the electrical lines system
before the dome. After clear the electrical problem, turn on
the power again. If the problem was not clear, the dome will
be shut down again
.
„
THE SHUT DOWN VOLTAGE: It is informed the input load
voltage when the dome was shut down.
„ THE PRESENT VOLTAGE: it is appeared the preset input
voltage, regardless shutdown voltage.
14. ERROR MESSAGES
CAM-001
CAMERA MODULE ERROR
CAM-001
P/T POSITION ERROR
CAM-001
SORRY NOT MEMORY
DETECTED LOWER VOLTAGE
Please check input voltage
THE SHUT DOWN VOLTAGE: xx V
THE PRESENT VOLTAGE: xx V