DXS-3350SR Gigabit Layer 3 Switch
Figure 6- 74. Initialize Port(s) (MAC-Based) window
These two windows allow you to initialize a port or group of ports. The Initialize Port Table in the bottom half of the
window displays the current status of the port(s) once you have clicked
Apply
.
These windows display the following information:
Parameter Description
Unit
Select desired unit.
From and To
Select ports to be initialized.
Port
A read only field indicating a port on the Switch.
MAC Address
The MAC address of the Switch connected to the corresponding port, if any.
Auth PAE State
The Authenticator PAE State will display one of the following:
Initialize, Discon-
nected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth,
ForceUnauth,
and
N/A.
Backend State
The Backend Authentication State will display one of the following:
Request,
Response, Success, Fail, Timeout, Idle, Initialize,
and
N/A.
Port Status
The status of the controlled port can be
Authorized, Unauthorized,
or
N/A.
NOTE:
The user must first globally enable 802.1X in the
Switch Information
(Advanced Settings)
window in the
Configuration
folder before initializing ports.
Information in the Initialize Ports Table cannot be viewed before enabling 802.1X.
125
Содержание xStack DXS-3350SR
