xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
DHCP Server Manual Binding
The following windows will allow users to view and set manual DHCP entries. Manual DHCP entries will bind an IP address with
the MAC address of a client within a DHCP pool. These entries are necessary for special devices on the local network that will
always require a static IP address that cannot be changed.
To view this window, click
L3 Features > DHCP Server > DHCP Server Manual Binding
, as shown below:
Figure 4- 81. DHCP Server Manual Binding Table window
Users may view statically bound DHCP entries within a DHCP pool by entering the Pool Name and clicking
Find
. Results will be
displayed in the window above. To remove an entry from the table, click its corresponding
under the Delete heading.
To set a manual DHCP Binding entry, click the
Add
window, which will produce the following window to configure.
Figure 4- 82. Create DHCP Pool Manual Binding window
The following parameters may be configured or viewed.
Parameter Description
Pool Name
Enter the name of the DHCP pool within which will be created a manual DHCP binding entry.
IP Address
Enter the IP address to be statically bound to a device within the local network that will be specified
by entering the Hardware Address in the following field.
Hardware
Address
Enter the MAC address of the client to be statically bound to the IP address entered in the previous
field.
Type
This field is used to specify the type of connection for which this manually bound entry will be set.
Ethernet
will denote that the manually bound device is connected directly to the Switch, while the
IEEE802
denotes that the manually bound device is outside the local network of the Switch.
Click
Apply
to set the entry.
238
