xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
CIST (default MSTI).
Type
The Type field in this window will be permanently set to
Set Priority Only
.
Priority (0-61440)
Enter the new priority in the Priority
field. The user may set a priority value between
0
and
61440
.
Click
Apply
to implement the new priority setting.
STP Port Settings
STP can be set up on a port per port basis. In addition to setting Spanning Tree parameters for use on the switch level, the Switch
allows for the configuration of groups of ports, each port-group of which will have its own spanning tree, and will require some of
its own configuration settings. An STP Group will use the switch-level parameters entered above, with the addition of Port
Priority and Port Cost. An STP Group spanning tree works in the same way as the switch-level spanning tree, but the root bridge
concept is replaced with a root port concept. A root port is a port of the group that is elected based on port priority and port cost,
to be the connection to the network for the group. Redundant links will be blocked, just as redundant links are blocked on the
switch level. The STP on the switch level blocks redundant links between switches (and similar network devices). The port level
STP will block redundant links within an STP Group.
It is advisable to define an STP Group to correspond to a VLAN group of ports.
To view the STP Port Settings window click
L2 Features > Spanning Tree > STP Port Settings
, as shown below:
Figure 3- 60. STP Port Settings window
The following STP Port Settings fields can be set:
Parameter Description
Unit
Select the unit to configure.
141
