D-Link xStack DES-3500 Series, Руководство CLI

Страница: 17 / 260

DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
14
enable clipaging
Syntax enable clipaging
Description This command is used when issuing a command which causes the
console screen to rapidly scroll through several pages. This
command will cause the console to pause at the end of each page.
The default setting is enabled.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this
command.
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
DES-3500:admin#enable clipaging
Command: enable clipaging
Success.
DES-3500:admin#
disable clipaging
Purpose
Used to disable the pausing of the console screen scrolling at the
end of each page when a command displays more than one screen
of information.
Syntax disable clipaging
Description This command is used to disable the pausing of the console screen
at the end of each page when a command would display more than
one screen of information.
Parameters
None.
Restrictions Only Administrator and Operator-level users can issue this
command.
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DES-3500:admin#disable clipaging
Command: disable clipaging
Success.
DES-3500:admin#
enable telnet
Purpose Used to enable communication with and management of the Switch
using the Telnet protocol.
Syntax enable telnet <tcp_port_number 1-65535>
Description This command is used to enable the Telnet protocol on the Switch.
The user can specify the TCP or UDP port number the Switch will
use to listen for Telnet requests.
Parameters
<tcp_port_number 1-65535>
−
The TCP port number. TCP ports
are numbered between 1 and 65535. The “well-known” TCP port for