4 Configuration
D-Link Web Smart Switch User Manual
6
6
9
9
Click
Next
button then the ACL profile is added.
To define the IPv4 ACL UDP Rule:
Select
IPv4 ACL
with
UDP
and click
Next
button. The updates to show
the follows:
Figure 4.102 - Add Access Rule – IPv4 UDP
IPv4 Address:
Defines the range of source Ports relevant to the ACL rules.
Source:
Defines the range of source Ports relevant to the ACL rules. For example, to set 0 – 15, set mask of
FFF0.
Destination:
Defines the range of destination IP addresses, relevant to the ACL rules. For example, to set
0 – 15, set mask of FFF0.
Click
Next
button then the ACL profile is added.
NOTE:
A combination of one or several filtering
masks can be selected simultaneously. The page
updates with the relevant field(s).
To define the IPv6 ACL ICMP rule:
Select
IPv6 ACL
with
ICMP
of
Protocol Type
and click
Next
button.
The updates to show the follows:
