53
D-Link DCS-7110 User Manual
Configuration
Event Settings
This section explains how to configure the camera to respond to particular situations (event). A typical application is that when a motion is
detected, the camera sends buffered images to an FTP server or e-mail address as notifications.
Sever Settings
Click
Add
to open the
Server Settings
page. On this page, you can specify where the
notification messages are sent when a trigger is activated. A total of five server settings
can be configured.
• Type:
There are four choices of server types available:
,
FTP
,
HTTP
, and
Network Storage
. Select the item to display the detailed configuration options. You
can configure either one or all of them.
Email:
Select to send the media files via e-mail when a trigger is activated.
• Server name:
Enter a name for the server setting.
• Sender email address:
Enter the email address of the sender.
• Recipient email address:
Enter the email address of the recipient.
• Server address:
Enter the domain name or IP address of the e-mail server.
• User name:
Enter the user name of the email account if necessary.
• Password:
Enter the password of the email account if necessary.
• Server port:
The default mail server port is set to 25. You can also manually set
another port.
If your SMTP server requires a secure connection, select
This server requires a secure
connection
and then select either
SSL
or
TLS
.
To verify if the email settings are correctly configured, click
Test
. The result will be shown
in a pop-up window. If successful, you will also receive an e-mail indicating the result.
Click
Save
to enable the settings, then click
Close
to exit the page.