18
D-Link DHP-W611AV User Manual
Section 3 - Configuration
This section will show you how to configure your new Powerline device using the web-based configuration utility.
PLC Settings
Network Name:
Public Network
Name:
Private Network
Name:
Network List:
QoS Settings:
MAC Address/
Priority:
You can set the name of your network and set it as either
public or private. Make sure the network names of all of the
devices within your Powerline network is the same.
Select this option if you would like to make your Powerline
network public using “HomePlugAV” as the default network
name. Since this is a commonly used network name, it is less
secure than a private network name.
Select this option if you wish to make your Powerline network
more secure by using a private network name.
This section lists devices connected to your Powerline
network as well as their MAC address and connection speed.
Click the
Scan
button to scan for new Powerline devices. This
list is automatically updated and will refresh with this page.
Here you can set the Quality of Service (QoS) Settings for
each network device. QoS helps you prioritize network traffic
based on the device or port.
Select a device from the
Client List
dropdown box and then
click the
<<
next to
Computer Name
to automatically fill in
the device’s MAC Address. Then set the order of priority for
the device under the
Priority
dropdown box. Clear settings
for a rule using the
Clear
button.
Click
Save Settings
for the changes to take effect.