NAT. (Default: LocalInterface)
OriginatorIP
Manually specified originator IP address to use as
source IP in e.g. NAT.
OriginatorHAIP
Manually specified private originator IP address for
use in HA. (Optional)
DHGroup
Specifies the Diffie-Hellman group to use when do-
ing key exchanges in IKE. (Default: 2)
PFS
Specifies whether PFS should be used or not.
(Default: None)
PFSDHGroup
Specifies which Diffie-Hellman group to use with
PFS. (Default: 2)
SetupSAPer
Setup security association per network, host or port.
(Default: Net)
KeepAlive
Disabled, Auto or Manual. (Default: Disabled)
KeepAliveSourceIP
Source IP address used when sending keep-alive
ICMP pings.
KeepAliveDestinationIP
Destination IP address used when sending keep-alive
ICMP pings.
Metric
Specifies the metric for the auto-created route.
(Default: 90)
AutoInterfaceNetworkRoute
Automatically add a route for this interface using the
given remote network. (Default: Yes)
Comments
Text describing the current object. (Optional)
3.28.6. L2TPClient
Description
A PPTP/L2TP client interface is a PPP (Point-to-Point Protocol) tunnel over an existing IP network.
Its IP address and DNS servers are dynamically assigned.
Properties
Name
Specifies a symbolic name for the interface.
(Identifier)
IP
The host name to store the assigned IP address in, if
this network object exists and have a value other
then 0.0.0.0 the PPTP/L2TP client will try to get that
one from the PPTP/L2TP server as preferred IP.
(Optional)
Network
The network from which traffic should be routed in-
to the tunnel.
RemoteEndpoint
The IP address of the L2TP/PPTP server.
3.28.6. L2TPClient
Chapter 3. Configuration Reference
127
Содержание NetDefend DFL-260E
Страница 18: ...1 6 User roles Chapter 1 Introduction 18...
Страница 75: ...2 4 5 script Chapter 2 Command Reference 75...
Страница 139: ...Comments Text describing the current object Optional 3 32 IPsecAlgorithms Chapter 3 Configuration Reference 139...
Страница 195: ...3 55 UserAuthRule Chapter 3 Configuration Reference 195...