3.115. ServiceIPProto
Description
An IP Protocol Service is a definition of an IP protocol with specific parameters.
Properties
Name
Specifies a symbolic name for the service.
(Identifier)
IPProto
IP protocol number or range, e.g. "1-4,7" will match
the protocols ICMP, IGMP, GGP, IP-in-IP and CBT.
(Default: 0-255)
ForwardICMPErrors
Allow ICMP errors for active connections to be
forwarded through the system. (Default: No)
EnableIPv4PathMTUDiscovery
Path
MTU
Discovery
allows
communicating
endpoints to negotiate optimal packet sizes. This
prevents fragmentation by network equipment
between the endpoints. Path MTU Discovery relies
on ICMP message forwarding so ICMP forwarding
must also be enabled. (Default: No)
Protocol
Protocol settings are only used by IP Policies.
(Optional)
MaxSessionsProtocol
Specifies how many concurrent sessions that are
permitted using this Protocol. (Default: 200)
ALG
An Application Layer Gateway (ALG), capable of
managing advanced protocols, can be specified for
this service. (Optional)
MaxSessions
Specifies how many concurrent sessions that are
permitted using this service. (Default: 200)
Comments
Text describing the current object. (Optional)
Chapter 3: Configuration Reference
295
Содержание NetDefend DFL-260E
