D-Link NetDefend DFL-260E, Справочное руководство

Страница: 286 / 328

MonitorGateway Mark the route as down if the next hop does not
answer on ARP lookups during a specified time.
(Default: No)
MonitorGatewayARPInterval Specifies the ARP lookup interval in milliseconds.
(Default: 1000)
EnableHostMonitoring Enables the Host Monitoring functionality.
(Default: No)
Reachability Specifies the number of hosts that are required to
be reachable to consider the route to be active.
(Default: ALL)
GracePeriod Specifies the time to wait after a reconfiguration
until the monitoring begins. (Default: 5)
ReachabilityCount Minimum number of reachable hosts to consider
the route to be active.
Metric Specifies the metric for this route. (Default: 100)
ProxyARPAllInterfaces Always select all interfaces, including new ones, for
publishing routes via Proxy ARP. (Default: No)
ProxyARPInterfaces Specifies the interfaces on which the firewall
should publish routes via Proxy ARP. (Optional)
Comments Text describing the current object. (Optional)
Note
If no
Index
is specified when creating an instance of this type, the object will be placed
last in the list and the
Index
will be equal to the length of the list.
3.110.1.1. MonitoredHost
Description
Specify a host and a monitoring method.
Properties
Method Monitoring method. (Default: ICMP)
IPAddress Specifies the IP address of the host to monitor.
Port Specifies the TCP port to monitor.
SourceIPSelection Which IP should be used as a source IP. (Default:
Automatic)
SourceIP The IP address to be used as source IP.
PollingInterval Delay in milliseconds between each monitor
attempt. (Default: 10000)
Chapter 3: Configuration Reference
286