D-Link NetDefend DFL-260E, Справочное руководство

Страница: 212 / 328

(Optional)
SourceAddressTranslation Action to take on source address. (Default: Auto)
NATSourceAddressAction Specify method to determine which sender
address to use. (Default: OutgoingInterfaceIP)
SATSourceAddressAction Specify method to determine which sender
address to use.
SourceNewIP Specifies which sender address will be used.
SourceBaseIP Specifies base address for sender address.
SourceNATPool Specifies NAT Pool to fetch sender address to be
used.
SourcePortAction Specify method to determine which port action to
use. (Default: None)
SourceNewSinglePort Translate to this port. (Optional)
SourceBasePort Transpose using this port as base. (Optional)
LogEnabled Enable logging. (Default: Yes)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Comments Text describing the current object. (Optional)
Note
If no
Index
is specified when creating an instance of this type, the object will be placed
last in the list and the
Index
will be equal to the length of the list.
3.63.4. StatelessPolicy
Description
No state is kept between packets which means it is less secure and slower than stateful
forwarding.
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies a symbolic name for the policy.
Action Allow or Deny. (Default: Allow)
Reject Drop the packet and respond with an ICMP error or
TCP reset. (Default: No)
SourceAddressTranslation Action to take on source address. (Default: None)
SATSourceAddressAction Specify method to determine which sender
Chapter 3: Configuration Reference
212