D-Link NetDefend DFL-260E, Руководство пользователя

Страница: 29 / 552

transfer between the administrator's workstation and the NetDefend
Firewall. Various files used by NetDefendOS can be both uploaded and
downloaded with SCP.
This feature is fully described in Section 2.1.6, “Secure Copy”.
Console Boot Menu Before NetDefendOS starts running, a console connected directly to the
NetDefend Firewall's RS232 port can be used to do basic configuration
through the boot menu. This menu can be entered by pressing any
console key between power-up and NetDefendOS starting. It is the
D-Link firmware loader that is being accessed with the boot menu.
This feature is fully described in Section 2.1.7, “The Console Boot
Menu”.
Note: Recommended browsers
Microsoft Internet Explorer (version 7 and later), Firefox (version 3.0 and later) and
Netscape (version 8 and later) are the recommended web-browsers to use with the
WebUI. Other browsers may also provide full support.
Remote Management Policies
Access to remote management interfaces can be regulated by a remote management policy so the
administrator can restrict management access based on source network, source interface and
username/password credentials.
Access to the Web Interface can be permitted for administrative users on a certain network, while at
the same time allowing CLI access for a remote administrator connecting through a specific IPsec
tunnel.
By default, Web Interface access is enabled for users on the network connected via the LAN
interface of the D-Link firewall (on products where more than one LAN interface is available,
LAN1 is the default interface).
2.1.2. The Default Administrator Account
By default, NetDefendOS has a local user database, AdminUsers, that contains one predefined
administrator account. This account has the username admin with password admin. This account
has full administrative read/write privileges for NetDefendOS.
Important
For security reasons, it is recommended to change the default password of the default
account as soon as possible after connecting with the NetDefend Firewall.
Creating Additional Accounts
Extra user accounts can be created as required. Accounts can either belong to the Administrator
user group, in which case they have complete read/write administrative access. Alternatively, they
can belong to the Auditor user group, in which case they have read-only access.
Multiple Administration Logins
NetDefendOS does not allow more than one administrator account to be logged in at the same time.
2.1.2. The Default Administrator
Account Chapter 2. Management and Maintenance
29