29
D-Link GO-RT-N300 User Manual
Section 3 - Configuration
WPS Setup
PIN.of.the.
Router:
Enable.WPS:
Disable.PIN:
Keep.Current.
Configuration:
ACL.Setup:
Displays the current PIN for the router’s WPS connection.
Wireless clients connecting to the router using the PIN
method should enter this PIN in order to connect.
Check the box to enable devices to connect to the router
using WPS.
Check the box to disable the PIN connection method. If this
option is disabled, clients can only use the PBC method to
connect.
Check this box to lock the current configuration. If this
option is disabled, wireless clients will not be able to
automatically adjust the router’s WPS settings when
connecting.
Click this button to be taken to the Access Control setup
tab, where you can configure filters to control which
wireless clients access your network, and which network
resources they can access. For more information on
configuring access control, please refer to “Access Control
List” on page <?>.
Click
Apply.Changes
to save the current configuration.