28
Using the Configuration Menu
SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-707P. The DI-
707P supports SNMP v1.
Advanced > SNMP
Enable SNMP-
(Simple Netwokkr Management Protocol)
Local-
LAN (Local Area Network)
Remote-
WAN (Wide Area Network)
Get Community-
Enter the password
public
in this field to allow “Read only” ac-
cess to the network administration using SNMP. You can view
the network, but no configuration is possible with this setting.
Set Community-
Enter the password
private
in this field to gain “Read and Write”
access to the network using SNMP software. The administrator
can configure the network with this setting.
