D-Link DGS-1100 Series Switch User Manual
Figure 13-15 Reset window
Select the
The Switch will be reset to its factory defaults including IP address and stacking
information, and the will save, reboot
option to reset the Switch’s configuration to its factory
default settings.
Select the
The Switch will be reset to its factory default except IP address, and then will save,
reboot
option to reset the Switch’s configuration to its factory default settings. This option will
exclude the IP address from being changed.
Select the
The Switch will be reset to its factory defaults including IP address
option to reset
the Switch’s configuration to its factory default settings.
Click the
Apply
button to initiate the factory default reset and reboot the Switch.
Reboot System
This window is used to reboot the Switch and alternatively save the configuration before doing so. To
view the following window, click
Tools > Reboot System
, as shown below:
Figure 13-16 Reboot System window
When rebooting the Switch, any configuration changes that was made during this session, will be
lost unless the
Yes
option is selected when asked to save the settings.
Click the
Reboot
button to alternatively save the settings and reboot the Switch.
Figure 13-17 Reboot System - Rebooting window
7
7
9
9
