D-Link DGS-1100 Series Switch User Manual
PoE Configuration
This window is used to configure the PoE port.
To view the following window, click
System > PoE > PoE Configuration
, as shown below:
Figure 5-9 PoE Configuration window
The fields that can be configured are described below:
Parameter
Description
From Port / To Port
Select the appropriate port range used for the configuration
here.
Priority
Select the priority for provisioning power to the port. Options
to choose from are
Critical
,
High
and
Low
.
State
Select this option to enable or disable the PoE functionality.
Power Limit
Select the power management mode for the PoE ports.
Options to choose from are
Auto,
Class 1, Class 2, Class 3,
and Class 4
.
Max Wattage
When selecting
Auto
in the
Mode
drop-down list, this option
appears. Tick the check box and enter the maximum wattage
of power that can be provisioned to the auto-detected PD. If
the value is not entered, the class of the PD automatically
determines the maximum wattage which can be provisioned.
The valid range for maximum wattage is between 1000 mW
and 30000 mW.
Time Profile
Select the
Time Profile
from the drop down list.
Note
: The
Time Profile
drop down menu will only have
available options if a time profile has been created.
Click the
Delete Time Range
button to clear the setting in the corresponding Time Range field.
Click the
Apply
button to accept the changes made.
Note
: The
Max Wattage
option will only be available if the check box next to the input field is
enabled. When enabled, the Power Limit drop down menu will not be available.
2
2
5
5
