4 Configuration
D-Link Smart Managed Switch User Manual
22
Figure 4. 28 - L2 Features > FDB > Static FDB > Multicast Static FDB
The fields that can be configured are described below:
Item
Description
From Port / To Port
Select the appropriate port range used for the configuration.
VID
Enter the VLAN ID of the VLAN which the corresponding MAC
address belongs to.
MAC Address
Enter the static destination MAC address of the multicast packets.
This must be a multicast MAC address. The format of the
destination MAC address is 01-XX-XX-XX-XX-XX.
Table 4.13
Click
Apply
to make the configurations take effect.
Click
Delete All
to delete all the entries found in the display table.
Click
Delete
to remove the corresponding entry.
L2 Features > FDB > MAC Address Table Settings
This window allows user to view and configure the MAC address learning function.
Figure 4.29 - L2 Features > FDB > MAC Address Table Settings
The fields that can be configured for
MAC Address Learning
are described below:
Item
Description
From Port / To Port
Select the appropriate port range used for the configuration.
State
Specify to enable or disable the MAC address learning function.
The default is
Enabled
.
Table 4.14
Click
Apply
to make the configurations take effect.
