63
D-Link M15 User Manual
Section 3 - Configuration
Virtual Server
The virtual server allows you to specify a public port on the M15 for redirection
to an internal LAN IP address and private LAN port. To configure the virtual
server, from the Port Forwarding page click
Virtual Server
.
If you want to remove a rule, click
in the Delete column. If you wish to edit
a rule, click
in the Edit column. If you wish to create a new rule, click the
Add Rule
button.
If you edit or create a rule, the following options will appear:
Name
Enter a name for the rule. Alternatively, select the protocol/
Application Name from the drop-down menu. Depending on
the requested service, the router redirects the external service
request to the appropriate internal host.
Local IP
Enter the IP address of the computer on your local network
that you want to direct the incoming service to. Alternatively,
select the device from the drop-down menu.
Protocol
Select the protocol of the traffic to allow or deny (
TCP, UDP,
Both,
or
Other
).
Protocol
Number
If you entered
Other
above, enter the protocol number. Refer
to https://www.iana.org/assignments/protocol-numbers/
protocol-numbers.xhtml for Assigned Internet Protocol
Numbers.
External Port
Enter the public port for this service.
Internal Port
Enter the private port for this service.
Schedule
Use the drop-down menu to select the time schedule that the
rule will be enabled for. The schedule may be set to
Always
Enable
, or you can create your own schedules in the
Schedules
section. Refer to Refer to
Time & Schedule - Schedule on
for more information.