D-Link DXS-3610-54S, Быстрое руководство по установке

Страница: 15 / 38

The diagram below display a typical end node connected to the Switch.
Figure 24. Switch to End Node
Switch Management
Command Line Interface (CLI)
The CLI provides access to all of the software features available on the Switch. These features can be
enabled, configured, disabled, or monitored by simply entering the appropriate command after the CLI
prompt and pressing the Enter key. The Console port offers an Out-Of-Band (OOB) connection to the CLI
and the LAN ports offers an in-band connection to the CLI using Telnet or SSH.
Connecting to the Console Port
The Console port is used to connect to the CLI of the Switch. Connect the DB9 connector of the console
cable (included in the packaging) to the Serial (COM) port of the computer. Connect the RJ45 connector of
the console cable to the Console port on the Switch.
To access the CLI through the Console port, Terminal Emulation Software must be used like PuTTY or Tera
Term . The Switch uses a connection of 115200 bits per second with no flow control enabled.
Figure 25. Console Connection Settings
After the boot sequence completed, the CLI login screen is displayed.
NOTE: The default username and password for the CLI and Web UI is admin .
Logging into the CLI
At the login screen, enter the Username and Password and press Enter after each entry to access the CLI.
15