D-Link DXS-3610-54S, Быстрое руководство по установке

Страница: 14 / 38

Switch to Switch
The DGS-3610-54S switch can be used to connect to any other switch or hub in the network. This network
topology is used when the Switch does not have enough ports to cater for all the end nodes in the network.
There is a great deal of flexibility on how connections are made using the appropriate cabling.
• Connect a 1000BASE-T switch port to the Switch via a Category 5e UTP/STP cable.
• Connect a 10GBASE-T switch port to the Switch via a Category 6/6a/7 UTP/STP cable.
• Connect a fiber uplink switch port to the Switch's SFP+/QSFP28 port via a fiber optical cable.
Figure 22. Switch to another Switch/Hub
Switch to Server
The DGS-3610-54S switch is ideal for connecting to a network backbone, server, or server farm. The RJ45
ports operate at speeds of 1/10 Gbps, the SFP+ ports operate at speeds of 1/10 Gbps, and the QSFP28
ports operate at speeds of 10/25/40/50/100 Gbps.
Figure 23. Switch to a Server
Switch to End Node
An end node is a generic name for edge networking devices that will be connected to this switch. Typical
examples of end nodes are Personal Computers (PCs), Notebooks, Access Points, Print Servers, VoIP
Phones and more. Each end node should be fitted with an RJ45 networking port. Normally, end nodes will
connect to this switch by using a standard twisted-pair UTP/STP network cable. When a successful
connection is established, the corresponding port light will illuminate and blink to indicate that network activity
is taking place on that port.
14