manualshive.com logo in svg

D-Link DXS-3227 - xStack Switch - Stackable, Руководство CLI

Поделиться
Скачать
D-Link DXS-3227 - xStack Switch - Stackable Скачать руководство пользователя страница 284

SNMP Commands

Page 283 

snmp-server v3-host

The 

snmp-server v3-host 

Global Configuration mode command specifies the recipient of Simple Network 

Management Protocol Version 3 notifications. To remove the specified host, use the 

no 

form of this command.

Syntax

snmp-server v3-host {ip-address | hostname} username [traps | informs] {noauth | auth | priv} [udp-port port] 
[filter filtername] [timeout seconds] [retries retries]

no snmp-server host {ip-address | hostname} username [traps | informs]

Parameters
•

ip-address

—Specifies the IP address of the host (targeted recipient). 

•

hostname

—Specifies the name of the host. (Range:1-158 characters)

•

username

—Specifies the name of the user to use to generate the notification. (Range: 1-25)

•

traps

—Indicates that SNMP traps are sent to this host.

•

informs

—Indicates that SNMP informs are sent to this host.

•

noauth

—Indicates no authentication of a packet.

•

auth

—Indicates authentication of a packet without encrypting it.

•

priv

—Indicates authentication of a packet with encryption.

•

port

—Specifies the UDP port of the host to use. If unspecified, the default UDP port number is 162. 

(Range: 1-65535)

•

filtername

—Specifies a string that defines the filter for this host. If unspecified, nothing is filtered. 

(Range: 1-30 characters)

•

seconds

—Specifies the number of seconds to wait for an acknowledgment before resending informs. If 

unspecified, the default timeout period is 15 seconds. (Range: 1-300)

•

retries

—Specifies the maximum number of times to resend an inform request. If unspecified, the default 

maximum number of retries is 3. (Range: 1-255)

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

A user and notification view are not automatically created. Use the 

snmp-server user

, 

snmp-server group

 and 

snmp-server view

 Global Configuration mode commands to generate a user, group and notify group, 

respectively.

Example

The following example configures an SNMPv3 host.

Console(config)# 

snmp-server v3-host

 192.168.0.20 john 

noauth

Содержание DXS-3227 - xStack Switch - Stackable



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды