D-Link DXS-3227 - xStack Switch - Stackable, Руководство CLI

Страница: 19 / 466

The ports may be described on an individual basis or within a range. Use format port number-port number to
specify a set of consecutive ports and port number,port number to indicates a set of non-consecutive ports. For
example, 1-3 stands for Gigabit Ethernet ports 1, 2 and 3, and 1,5 stands for Gigabit Ethernet ports 1 and 5.
Keyboard Shortcuts
The CLI has a range of keyboard shortcuts to assist in editing the CLI commands. The following table describes
the CLI shortcuts.
CLI Command Conventions
When entering commands there are certain command entry standards that apply to all commands. The following
table describes the command conventions.
Copying and Pasting Text
Up to 1000 lines of text (i.e., commands) can be copied and pasted into the device.
K e y b o a r d K e y D e s c r i p t i o n
Up-arrow key Recalls commands from the history buffer, beginning with the most recent command.
Repeat the key sequence to recall successively older commands.
Down-arrow key Returns the most recent commands from the history buffer after recalling commands with
the up arrow key. Repeating the key sequence will recall successively more recent com-
mands.
Ctrl+A Moves the cursor to the beginning of the command line.
Ctrl+E Moves the cursor to the end of the command line.
Ctrl+Z / End Returns back to the Privileged EXEC mode from any configuration mode.
Backspace key Deletes one character left to the cursor position.
C o n v e n t i o n D e s c r i p t i o n
[ ] In a command line, square brackets indicates an optional entry.
{ } In a command line, curly brackets indicate a selection of compulsory parameters sepa-
rated by the | character. One option must be selected. For example:
flowcontrol
{auto|on|off} means that for the flowcontrol command either auto , on or off must be
selected.
Italic font Indicates a parameter.
<Enter> Indicates an individual key on the keyboard. For example, <Enter> indicates the Enter
key.
Ctrl+F4 Any combination keys pressed simultaneously on the keyboard.
Screen Display
Indicates system messages and prompts appearing on the console.
all When a parameter is required to define a range of ports or parameters and all is an
option, the default for the command is all when no parameters are defined. For exam-
ple, the command interface range port-channel has the option of either entering a
range of channels, or selecting all . When the command is entered without a parameter,
it automatically defaults to all .