manualshive.com logo in svg

D-Link DWS-4026, Руководство пользователя

D-Link DWS-4026 - универсальный беспроводной контроллер, обеспечивающий гибкую сеть управления. Предоставляет полный контроль над беспроводной сетью и обеспечивает высокую производительность. Скачайте бесплатное руководство пользователя с manualshive.com, чтобы настроить и использовать устройство эффективно.

Поделиться
Скачать
background image

D-Link Unified Access System

Software User Manual

12/10/09

Page 392

RADIUS Settings

Document

34CSFP6XXUWS-SWUM100-D7

Use the buttons at the bottom of the page to perform the following actions:

•

Click 

Refresh

 to update the page with the most current information.

•

If you make changes to the page, click 

Submit

 to apply the changes to the system.

RADIUS S

ERVER

 C

ONFIGURATION

From the 

RADIUS Authentication Server Configuration

 page, you can add a new RADIUS server, configure settings for

a new or existing RADIUS server, and view RADIUS server status information. The RADIUS client on the switch supports
up to 32 named authentication and accounting servers.

To access the RADIUS Server Configuration page, click 

LAN > Security > RADIUS > RADIUS Authentication Server

Configuration

 in the navigation menu.

If there are no RADIUS servers configured on the system, or if you select Add from the RADIUS Server Host Address menu,
a subset of the fields described in the following table are available. After you enter the RADIUS host address and click

Submit

, the additional configuration fields appear.

Number of Configured 
Accounting Servers

The number of RADIUS accounting servers configured on the system. The value can 
range from 0 to 32.

Number of Named 
Authentication Server Groups

The number of authentication server groups configured on the system. An 
authentication server group contains one or more configured authentication servers 
that share the same RADIUS server name. 

Number of Named Accounting 
Server Groups 

The number of accounting server groups configured on the system. An accounting 
server group contains one or more configured authentication servers that share the 
same RADIUS server name. 

Max Number of Retransmits

The value of the maximum number of times a request packet is retransmitted. The 
valid range is 1-15. 

Consideration to maximum delay time should be given when configuring RADIUS max 
retransmit and RADIUS timeout. If multiple RADIUS servers are configured, the max 
retransmit value on each will be exhausted before the next server is attempted. A 
retransmit will not occur until the configured timeout value on that server has passed 
without a response from the RADIUS server. Therefore, the maximum delay in 
receiving a response from the RADIUS application equals the sum of (retransmit times 
timeout) for all configured servers. If the RADIUS request was generated by a user 
login attempt, all user interfaces will be blocked until the RADIUS application returns 
a response.

Timeout Duration (secs)

The timeout value, in seconds, for request retransmissions. The valid range is 1 - 30. 

See the Max Number of Retransmits field description for more information about 
configuring the timeout duration.

Accounting Mode

Use the menu to select whether the RADIUS accounting mode is enabled or disabled 
on the current server.

RADIUS Attribute 4 (NAS-IP 
Address)

To set the network access server (NAS) IP address for the RADIUS server, select the 
option and enter the IP address of the NAS in the available field. 

The address should be unique to the NAS within the scope of the RADIUS server. The 
NAS IP address is only used in Access-Request packets. 

Table 248:  RADIUS Configuration Fields (Cont.)

Field

Description

Содержание DWS-4026

































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWS-4026

GE PACSystems RX7i Cpu Programmer'S Reference Manual preview
PACSystems RX7i
Бренд: GE Страницы: 469
GE GuardSwitch 300 Series Instructions preview
GuardSwitch 300 Series
Бренд: GE Страницы: 2
GE GuardSwitch 300 Series Instruction preview
GuardSwitch 300 Series
Бренд: GE Страницы: 2
Warren Controls 313 Installation, Operation & Maintenance Instructions Manual preview
313
Бренд: Warren Controls Страницы: 16
FAAC E124 Original Instructions Manual preview
E124
Бренд: FAAC Страницы: 44
ZKTeco F6 Installation Manual preview
F6
Бренд: ZKTeco Страницы: 2
FASAR ELETTRONICA FE230 Quick Start Manual preview
FE230
Бренд: FASAR ELETTRONICA Страницы: 2
Faro 33928 Installation Manual preview
33928
Бренд: Faro Страницы: 3
YASKAWA G7 Series Technical Manual preview
G7 Series
Бренд: YASKAWA Страницы: 456
Samson TROVIS 3730-1 Installation Instructions Manual preview
TROVIS 3730-1
Бренд: Samson Страницы: 6
Ascon tecnologic Y39 Operating Instructions Manual preview
Y39
Бренд: Ascon tecnologic Страницы: 16
KIOUR FA3F Quick Start Manual preview
FA3F
Бренд: KIOUR Страницы: 3
Forcepoint C1015 Hardware Manual preview
C1015
Бренд: Forcepoint Страницы: 15
SMC Networks JAS-L Series Operation Manual preview
JAS-L Series
Бренд: SMC Networks Страницы: 12
Danfoss VLTAutomationDrive FC 360 Quick Manual preview
VLTAutomationDrive FC 360
Бренд: Danfoss Страницы: 52
Xylem Aquavar IPC Quick Start Manual preview
Aquavar IPC
Бренд: Xylem Страницы: 28
Overland Storage NEO 2000e Remove & Replace Instructions preview
NEO 2000e
Бренд: Overland Storage Страницы: 4
R-Tec controlR Installation Manual & User Manual preview
controlR
Бренд: R-Tec Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды