D-Link DWS-1008, Руководство по эксплуатации продукта

Страница: 91 / 502

D-Link DWS-1008 User Manual
Managing SSH Server Sessions
Use the following commands to manage SSH server sessions:
show sessions admin
clear sessions admin ssh
[session-id]
These commands display and clear SSH server sessions.
Note: If you type the clear sessions admin ssh command from within an SSH session, the session
ends as soon as you press
Enter.
To display the SSH server sessions on a DWS-1008 switch, type the following command:
DWS-1008# show sessions admin
Tty Username Time(s) Type
--------------------------------------------------------
tty0 3644 Console
tty2 tech 6 Telnet
tty3 sshadmin 381 SSH
To clear all SSH server sessions, type the following command:
DWS-1008# clear sessions admin ssh
This will terminate manager sessions, do you wish to continue? (y|n) [n]y
Cleared ssh session on tty3
Managing Telnet
Telnet requires a valid username and password for access to the switch.
Telnet Login Timers
After the username prompt is displayed, MSS allows 30 seconds to enter a valid username and password
to complete the login. If you do not press Enter or complete the login before the timer expires, MSS ends
the session. This timer is not configurable.
Enabling Telnet
Telnet is disabled by default. To enable Telnet, use the following command:
set ip telnet server {enable | disable}