manualshive.com logo in svg

D-Link DWS-1008, Руководство по эксплуатации продукта

D-Link DWS-1008 - высококачественный коммутатор с 8 портами и возможностью управления через веб-интерфейс. Чтобы настроить устройство, скачайте бесплатное руководство пользователя на manualshive.com. Получите доступ к полной информации о продукте для максимального удобства использования.

Поделиться
Скачать
background image

D-Link DWS-1008 User Manual

11

Backing Up and Restoring the System

MSS has commands that enable you to easily backup and restore system and user files:

backup system [tftp:

/ip-addr/

]

filename

 [all | critical]

restore system [tftp:

/ip-addr/

]

filename

 [all | critical] [force]

The 

backup command  creates  an archive  in Unix 

tape  archive

  (

tar

)  format. The 

restore  command 

unzips an archive created by the backup command and copies the files from the archive onto the switch. 

If a file in the archive has a counterpart on the switch, the archive version of the file replaces the file on 

the switch. The 

restore command does not delete files that do not have counterparts in the archive. For 

example, the command does not completely replace the user files area. Instead, files in the archive are 

added to the user files area. A file in the user area is replaced only if the archive contains a file with the 

same name.

You can create or unzip an archive located on a TFTP server or in the switch’s nonvolatile storage. If you 

specify a TFTP server as part of the filename with the 

backup command, the archive is copied directly 

to the TFTP server and not stored locally on the switch.

Both commands have options to specify the types of files you want to back up and restore:

• 

critical—Backs  up  or  restores  system  files,  including  the  configuration  file  used  when 

booting, and certificate files. The size of an archive created by this option is generally 1MB 

or less. This is the default for the restore command. 

• 

all—Backs up or restores the same files as the critical option, and all files in the user files 

area of nonvolatile storage. (The user files area contains the set of files listed in the file 

section of dir command output.) Archive files created by the all option are larger than files 

created by the critical option. The file size depends on the files in the user area, and the file 

can be quite large if the user area contains image files. This is the default for the backup 
command. 

Note:  If  the  archive’s  files  cannot  fit  on  the  switch,  the  restore  operation  fails.  D-link  recommends 

deleting unneeded image files before creating or restoring an archive.

Use the 

critical option if you want to back up or restore only the system-critical files required to operate 

and communicate with the switch. Use the 

all option if you also want to back up or restore WebAAA 

pages,  backup  configuration  files,  image  files,  and  any  other  files  stored  in  the  user  files  area  of 

nonvolatile storage. 

The maximum supported file size is 32 MB. If the file size of the tarball is too large, delete unnecessary 

files (such as unneeded copies of system image files) and try again, or use the 

critical option instead 

of the 

all option.

Neither option archives image files or any other files listed in the 

Boot

 section of 

dir command output. 

The 

all option archives image files only if they are present in the user files area.

The 

backup command stores the MAC address of the switch in the archive. By default, the restore 

command works only if the MAC address in the archive matches the MAC address of the switch where 

the 

restore command is entered. The force option overrides this restriction and allows you to unpack 

one switch’s archive onto another switch.

Содержание DWS-1008























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWS-1008

Pakedge SX-8P Quick Start Manual preview
SX-8P
Бренд: Pakedge Страницы: 24
Meridian SX-4FX Series Installation & Operation Instructions preview
SX-4FX Series
Бренд: Meridian Страницы: 16
Aruba 2930F Series Installation, Safety, And Regulatory Information preview
2930F Series
Бренд: Aruba Страницы: 6
LONG-JOIN JL-403C Manual preview
JL-403C
Бренд: LONG-JOIN Страницы: 2
Ableconn USBCHUB4A User Manual preview
USBCHUB4A
Бренд: Ableconn Страницы: 16
CTS FOS-3124 SERIES User Manual preview
FOS-3124 SERIES
Бренд: CTS Страницы: 223
Sangamo RPTS Q550 Installation & User'S Instructions preview
RPTS Q550
Бренд: Sangamo Страницы: 2
KanexPro HDMX44A-18G Operation Manual preview
HDMX44A-18G
Бренд: KanexPro Страницы: 35
C&C TECHNIC VAX-8204F User Manual preview
VAX-8204F
Бренд: C&C TECHNIC Страницы: 2
KinAn DV2302 User Manual preview
DV2302
Бренд: KinAn Страницы: 5
Lindy 32320 User Manual preview
32320
Бренд: Lindy Страницы: 12
Kensence S-Mix-Pro 18*18 Operation Manual preview
S-Mix-Pro 18*18
Бренд: Kensence Страницы: 24
Accton Technology EH2045S Quick Start Manual preview
EH2045S
Бренд: Accton Technology Страницы: 8
Black Box Personal MiniHub Manual preview
Personal MiniHub
Бренд: Black Box Страницы: 22
PIKA mWARP Manual preview
mWARP
Бренд: PIKA Страницы: 7
A-Neuvideo ANI-44VGA Instruction Manual preview
ANI-44VGA
Бренд: A-Neuvideo Страницы: 9
Lindy CONNECTION PERFECTION 32797 User Manual preview
CONNECTION PERFECTION 32797
Бренд: Lindy Страницы: 10
H-Tronic WPS 3000 Manual preview
WPS 3000
Бренд: H-Tronic Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды