D-Link DWS-1008 User Manual
88
Logging In to a Remote Device
From within an MSS console session or Telnet session, you can use the Telnet client to establish a
Telnet client session from a switch’s CLI to another device. To establish a Telnet client session with
another device, use the following command:
telnet {
ip-addr
|
hostname
} [port
port -num
]
To establish a Telnet session from switch to 10.10.10.90, type the following command:
DWS-1008#
telnet 10.10.10.90
Session 0 pty tty2.d Trying 10.10.10.90...
Connected to 10.10.10.90
Disconnect character is ‘^t’
Copyright (c) 2002, 2003 D-Link Systems, Inc.
Username:
When you press Ctrl+t or type exit to end the client session, the management session returns to the
local prompt:.
DWS-1008-remote> Session 0 pty tty2.d
terminated tt name tty2.d
DWS-1008#
Use the following commands to manage Telnet client sessions:
show sessions telnet client
clear sessions telnet client [
session-id
]
These commands display and clear Telnet sessions from a switch’s Telnet client to another device.
To display the Telnet client sessions on a switch, type the following command:
DWS-1008#
show sessions telnet client
Session
Server Address
Server Port Client Port
---------------------------------------------------------------------------------------
0
192.168.1.81
23
48000
1
10.10.1.22
23
48001
To clear Telnet client session 0, type the following command:
DWS-1008#
clear sessions telnet client 0
You also can clear a Telnet client session by typing exit from within the client session.
Содержание DWS-1008
Страница 1: ......