D-Link DWR-512, Руководство пользователя

Страница: 45 / 88

40 D-Link DWR-512 User Manual
Section 3 - Configuration
OUTBOUND FILTER SETTING
Select this box to
Enable
outbound filtering.
Select a schedule to use and copy to the specified
rule ID when you click the
Copy to
button. You may
select Always On or use a specific schedule that
you have defined. To create and edit schedules,
please refer to “Schedules” on page 54.
OUTBOUND FILTER RULES LIST
Here, you can select whether to Allow or Deny all outgoing
traffic except for traffic that matches the listed rules.
This identifies the rule.
Specify the local IP address and then
specify the port after the colon.
Specify the remote IP address and
then the port after the colon.
Tick the checkbox to enable the specified rule.
Specify the schedule rule number.
Go back to the previous filter page.
Advance to the next filter page.
Outbound Filter
Outbound Filter:
Use Schedule Rule:
ID:
Source IP : Ports:
Destination IP : Ports:
Enable:
Schedule Rule #:
Previous Page:
Next Page:
Outbound Filter enables you to control what packets are allowed to be sent out to the Internet. The outbound filter applies to all outbound
packets. After modifying any settings, click Save Settings to save your changes.