42
D-Link DWR-512 User Manual
Section 3 - Configuration
SNMP
Select whether to
Enable
or
Disable
local SNMP administration.
Select whether to
Enable
or
Disable
remote SNMP administration.
Enter the password
public
in this field to allow
read-only access to network administration
using SNMP. You can view the network, but no
configuration is possible with this setting.
Enter the password
private
in this field to enable
read/write access to the network using SNMP.
Enter up to 4 IP addresses to use as
trap targets for your network.
Select the SNMP version of your system.
If you want to limit remote access SNMP access, enter the
IP address of the remote computer you will use to access
this device. All other IP addresses will be denied remote
SNMP access.
SNMP
SNMP Local:
SNMP Remote:
Get Community:
Set Community:
IP 1, IP 2, IP 3, IP 4:
SNMP Version:
WAN Access IP
Address
SNMP
(Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each
network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DWR-512. The DWR-512
supports SNMP v1 and v2c. After modifying any settings, click
Save Settings
to save your changes.
Содержание DWR-512
Страница 1: ......
