D-Link DWR-512 Скачать руководство пользователя страница 43

Страница: 43 / 88

D-Link DWR-512 User Manual

Section 3 - Configuration

MAC Address Filter

MAC FILTERING SETTINGS

Tick this box to enable MAC Filtering.

Wireless and wired clients with

selected

can connect to this device and

allow/deny

connections from unspecified MAC addresses.

Wireless clients with

selected can associate to

the wireless LAN and

allow/deny

connections

from unspecified MAC addresses.

MAC FILTERING RULES

This identifies the rule.

Specify the MAC Address of the computer to be filtered.

Specify the last section of the IP address.

Click

Trigger

to configure Wake On LAN.

If this box is ticked, the rule will follow the

connection control setting specified in MAC

filtering settings specified above.

If this box is ticked, the rule will follow the

association control setting specified in MAC

filtering settings specified above.

MAC Address Control:

Connection Control:

Association Control:

ID:

MAC Address:

IP Address:

Wake On LAN:

The

MAC (Media Access Controller) Address Filter

option is used to control network access based on the MAC Address of the network

adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW

or DENY network/Internet access. After modifying any settings, click

Save Settings

to save your changes.

Содержание DWR-512

























































































Результаты поиска

Содержание DWR-512

Отзывы:

D-Link DWR-512, Руководство пользователя, Страница: 43 / 88

Результаты поиска

Содержание DWR-512

Отзывы: