36
D-Link DWR-111 User Manual
Section 3 - Configuration
SNMP
Select
Enabled
to allow local SNMP administration.
Select
Disabled
to disallow local SNMP
administration.
S elec t
Enabled
to allow remote SNMP
administration. Select
Disabled
to disallow remote
SNMP administration.
Enter the password
public
in this field to allow “Read
only” access to network administration using SNMP.
You can view the network, but no configuration is
possible with this setting.
Enter the password
private
in this field to gain
“Read and Write” access to the network using SNMP
software.
Enter up to four IP addresses of any trap targets on
your network.
Select the SNMP version of your system.
Remote IP address that can be used to access the
device for management via SNMP.
Click
Save Settings
to save your changes, or click
Don’t Save Settings
to discard your changes.
SNMP
SNMP Local:
SNMP Remote:
Get Community:
Set Community:
IP 1, IP 2, IP 3, IP 4:
SNMP Version:
WAN Access IP
Address:
SNMP
(Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device
to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DWR-111. The DWR-111 supports SNMP v1 or v2c.
