47
D-Link DWM-312 User Manual
Section 4 - Configuration
Indicates the ID of the user account.
Enter the user name of the account.
Enter the password of the account.
Note:
Passwords are stored in plaintext and are visible to anyone
with access to the web UI.
If
authNoPriv
or
authPriv
is selected under
Privacy Mode
,
choose
SHA1
or
MD5
authentication.
If
authPriv
is selected under
Privacy Mode
,
DES
encryption is
available.
Select
NoauthNoPriv
for no authentication and no encryption,
authNoPriv
for authentication only,
and
authPriv
to use both
authentication and encryption.
If encryption is enabled, enter a key between 8 and 27 ASCII
characters in length.
Select
Read
to allow this user read-only access to configuration, or
Read/Write
to enable full read-write access.
Check
Enable
to activate the user account. Uncheck to disable the
user account.
Click
Edit
to make changes to the corresponding account.
Click
Apply
to save your settings, or
Refresh
to revert to your
previous settings.
ID:
User Name:
Password:
Authentication:
Encryption:
Privacy Mode:
Privacy Key:
Authority:
Enable:
Actions:
SNMP (Cont)