40
D-Link DWM-312 User Manual
Section 4 - Configuration
Select this box to enable outbound filtering.
Select a schedule to use and copy to the specified rule ID when
you click the
Copy to
button. You may select
Always On
or use
a specific schedule that you have defined. To create and edit
schedules, please refer to
Schedules
on page 40.
OUTBOUND FILTER RULES LIST
Here, you can select whether to
Allow
or
Deny
all outgoing traffic
except for traffic that matches the listed rules.
This identifies the rule.
Specify the local IP address and then specify the port after the
colon.
Specify the remote IP address and then the port after the colon.
Check the box to enable the specified rule.
Specify the schedule rule number. Click on the
Add New Rule
button to create a new schedule rule.
Click to go back to the previous filter page.
Click to advance to the next filter page.
Click
Apply
to save your settings, or
Refresh
to revert to your
previous settings.
Outbound Filter:
Use Schedule Rule:
ID:
Source IP : Ports:
Destination IP :
Ports:
Enable:
Schedule Rule #:
Previous Page:
Next Page:
Outbound Filter
enables you to control what packets are allowed to be sent out to the Internet. The outbound filter applies to all outbound packets.
Firewall
Outbound Filter