manualshive.com logo in svg

D-Link DWM-312, Руководство пользователя, Страница: 37 / 96

Поделиться
Скачать
D-Link DWM-312 Скачать руководство пользователя страница 37

33

D-Link DWM-312 User Manual

Section 4 - Configuration

L2TP

L2TP Server

Check this box to enable the DWM-312’s internal L2TP server. If 

enabled, the following options will appear:

Select one or more authentication types for the server, either 

PAP

, 

CHAP

, 

MS_CHAP

, or 

MS_CHAP2

. Note that 

PAP

 and 

CHAP

 are 

not compatible with encryption.

Enter the address assigned to the server within the VPN. This will 

dictate the IP pool for clients.

Input the starting address for the server’s IP pool, from 1 to 254. 

Input the end address for the server’s IP pool from 1 to 254. Note 

that this number must be higher than the start address.

Check this box to enable L2TP encryption.

Specify the length of the encryption key.

Up to 5 user accounts can be created for VPN access. Specify the 

user names and passwords that will be used to connect to the 

VPN server. Note that user names and passwords are visible to any 

administrator.

Server Setup:

Authentication 

Type:

Server Virtual IP:

IP Pool Start 

Address:

IP Pool End 

Address:

Encryption:

Encryption 

Length:

User Account 

Setting:

Содержание DWM-312

































































































Отзывы:

Нет отзывов