![background image](http://html1.mh-extra.com/html/d-link/dwl-8600ap/dwl-8600ap_administrators-manual_3113106086.webp)
D-Link UAP
Software User Manual
12/10/09
Page 86
Upgrading the Firmware
34CSFP6XXUAP-SWUM100-D13
6.
Click
OK
to confirm the upgrade and start the process.
The upgrade process may take several minutes during which time the access point will be unavailable. Do not power
down the access point while the upgrade is in process. When the upgrade is complete, the access point restarts. The
AP resumes normal operation with the same configuration settings it had before the upgrade.
7.
To verify that the firmware upgrade completed successfully, check the firmware version shown on the
Upgrade
tab (and
also on the
Basic Settings
tab). If the upgrade was successful, the updated version name or number is indicated.
Use the following steps to upgrade the firmware on an access point by using HTTP:
1.
Clear the
Use TFTP to upload the file
option.
When you clear the check box, the Server IP field is disabled.
2.
If you know the path to the
New Firmware Image
file, enter it in the
New Firmware Image
field. Otherwise, click the
Browse
button and locate the firmware image file.
The firmware upgrade file supplied must be a
tar file. Do not attempt to use bin files or files of other formats for the
upgrade; these types of files will not work.
3.
Click
Upgrade
to apply the new firmware image.
Upon clicking
Upgrade
for the firmware upgrade, a popup confirmation window is displayed that describes the upgrade
process.
4.
Click
OK
to confirm the upgrade and start the process.
The upgrade process may take several minutes during which time the access point will be unavailable. Do not power
down the access point while the upgrade is in process. When the upgrade is complete, the access point restarts. The
AP resumes normal operation with the same configuration settings it had before the upgrade.
5.
To verify that the firmware upgrade completed successfully, check the firmware version shown on the
Upgrade
tab (and
also on the
Basic Settings
tab). If the upgrade was successful, the updated version name or number is indicated.
Note:
The firmware upgrade process begins once you click
Upgrade
and then
OK
in the popup confirmation
window.
Note:
The firmware upgrade process begins once you click
Upgrade
and then OK in the popup confirmation
window.
Содержание DWL-8600AP
Страница 2: ...D Link UAP Software User Manual 12 10 09...