Software User Manual
D-Link UAP
12/10/09
34CSFP6XXUAP-SWUM100-D13
Configuring the Wireless Distribution System
Page 57
To specify the details of traffic exchange from this access point to others, click the
WDS
tab.
Figure 13: Configuring WDS Settings
Before you configure WDS on the AP, note the following guidelines:
•
When using WDS, be sure to configure WDS settings on
both APs participating in the WDS link.
•
You can have only one WDS link between any pair of APs. That is, a remote MAC address may appear only once on the
WDS page for a particular AP.
•
Both APs participating in a WDS link must be on the same Radio channel and using the same IEEE 802.11 mode. (See
“Modifying Radio Settings” on page 43
for information on configuring the Radio mode and channel.)
•
When 802.11h is operational, setting up two WDS links can be difficult. See
“Using the 802.11h Wireless Mode” on
page 42
.
•
If you use WPA encryption on the WDS link over radio 1, VAP0 of radio 1 must use WPA Personal or WPA Enterprise as
the security mode. If you use WPA on a WDS link over radio 2, VAP0 of radio 2 must use WPA Personal or WPA
Enterprise as the security mode.
To configure WDS on this AP, describe each AP intended to receive hand-offs and send information to this AP. For each
destination AP, configure the fields listed in
Table 21
.
Содержание DWL-8600AP
Страница 2: ...D Link UAP Software User Manual 12 10 09...