D-Link DWL-8200AP - AirPremier Managed Dualband Access... страница 66 Скачать руководство пользователя | Manualshive

Страница: 66 / 134

background image

66

D-Link DWL-8200AP User Manual

Device Conﬁguration

Click on this button to access the configuration
properties of the selected device(s).

The device conﬁguration window allows you to conﬁgure settings but does not actually
apply the settings to the device unless you click the

Apply

button. You can also save

and load conﬁguration ﬁles from this window. When you load a conﬁguration ﬁle, you
must click

Apply

if you want the settings to be applied to the selected device(s).

The save button allows you to save a conﬁguration ﬁle of the selected
device settings. Only settings that have a checkmark next to them
are saved. You cannot save a conﬁguration ﬁle if you selected more
than one device in the device list.

The Exit button will close the device conﬁguration window. Any
settings that haven’t been applied will be lost.

The open button is used to load a previously saved conﬁguration ﬁle.
After opening a conﬁguration ﬁle, you must click the Apply button to
save the settings to the selected device(s).

To save settings to the device, you must click the Apply button. Only
settings that have a checkmark next to them will be applied.

Refresh will revert to the actual device settings of the selected
device(s).

The Clear Checks button deselects all conﬁgurable options. This
feature is useful if you only want to change a few settings. Deselect
all items and only check the items that you want to modify.

The Check All button will select all conﬁgurable options. Any setting
that has a checkmark next to it is applied to the device or saved to
the conﬁguration ﬁle.

You can conﬁgure a single device by highlighting one device in the list, or you can
conﬁgure multiple devices by highlighting multiple devices before clicking on the Device
Conﬁguration icon pictured above. The examples in this section show single device
conﬁguration. When you select multiple devices for conﬁguration the procedure will be
similar.

«
...
64
65
66
67
68
...
»

Содержание DWL-8200AP - AirPremier Managed Dualband Access...







































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWL-8200AP - AirPremier Managed Dualband Access...

Бренд: Pakedge Device & Software Страницы: 45

Бренд: Arris Страницы: 4

Бренд: OBERON Страницы: 3

Бренд: NetComm Страницы: 51

Бренд: ActionTec Страницы: 2

Бренд: Allnet Страницы: 83

WatchGuard AP327X O-105E

Бренд: Watchguard Страницы: 32

Бренд: ConnectGear Страницы: 40

Бренд: ConnectGear Страницы: 77

Бренд: Lafalink Страницы: 2

Бренд: Air Live Страницы: 18

Бренд: Planex Страницы: 83

Бренд: Zinwell Страницы: 56

Бренд: X-Micro Страницы: 56

Бренд: Icidu Страницы: 11

Бренд: Sapido Страницы: 20

Бренд: Solwise Страницы: 257

Бренд: SAGEMCOM Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды