76
DWL-300AP User’s Manual
D-Link Systems, Inc.
Troubleshooting
2. The wireless client cannot access the Internet in the Infrastructure mode.
Make sure the wireless client is associated and joined with the correct access point. To check
this connection:
Right-click
on the
Local Area Connection icon
in the taskbar> select
View
Available Wireless Networks
. The
Connect to Wireless Network
screen will appear. Please
make sure you have selected the correct available network, as shown in the illustrations below.
Check that the
IP address
assigned to the wireless adapter is within the same
IP address
range
as the access point and gateway.
Since the DWL-3200AP has an IP address of
192.168.0.50, wireless adapters must have an IP address in the same range, e.g., 192.168.0.x.
Each device must have a unique IP address; no two devices may have the same IP address.
The subnet mask must be the same for all the computers on the network.)
To check the
IP
address
assigned to the wireless adapter,
double-click
on the
Local Area Connection
icon
in the taskbar > select the
Support tab
and the
IP address
will be displayed.
Please
refer to
Checking the IP Address
in the
Networking Basics
section of this manual.)
If it is necessary to assign a
Static IP Address
to the wireless adapter, please refer to the
appropriate section in
Networking Basics
.
If you are entering a
DNS Server address
you
must also enter the
Default Gateway Address.
(Remember that if you have a DHCP-capable
router, you will not need to assign a static IP address. See
Networking Basics: Assigning
a Static IP Address
.)
