![D-Link DWL-3200AP - AirPremier - Wireless Access... Скачать руководство пользователя страница 28](http://html2.mh-extra.com/html/d-link/dwl-3200ap-airpremier-wireless-access/dwl-3200ap-airpremier-wireless-access_user-manual_3356064028.webp)
8
DWL-300AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
WMM:
Select
Enable
or
Disable, Disable
is selected by default. WMM
stands for Wi-Fi Multimedia, by enabling this feature it will improve
the user experience for audio and video applications over a Wi-Fi
network.
Praemble:
Select the default value
Short and Long,
or
Long Only.
RTS Length:
Transmit Power:
This value should remain at its default setting of 346. If you
encounter inconsistent data flow, only minor modifications to the
value range between 56 and 346 are recommended
Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum
power.
Wireless B/G Mode:
This function allows you to configure the wireless network with IEEE
80.11g only, IEEE 80.11b only, or IEEE 80.11g with backward
interoperability with IEEE 80.11b.
Antenna Diversity:
The DWL-300AP supports .4GHz radio with two antennas. Radio
is connected to each antenna and supports auto diversity mode by
default. This means that the access point will auto switch to the
antenna with better RSSI value.
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 346
byte setting will be fragmented before transmission. 346 is the
default setting
Fragment Length:
Super G Mode:
Super G is a group of performance enhancement features that
increase end user application throughput in an 80.11g network.
Super G is backwards compatible to standard 80.11g devices.
For top performance, all wireless devices on the network should be
Super G capable. Select either
Disabled
,
Super G without Turbo
,
or
Super G with Dynamic Turbo
.
Disabled:
Super G
without
Turbo:
Capable of Packet Bursting, FastFrames, Compression,
and no Turbo mode.
Super
G with
Dynamic
Turbo:
Capable of Packet Bursting, FastFrames, Compression,
and Dynamic Turbo. This setting is backwards compatible
with non-Turbo (legacy) devices. Dynamic Turbo mode is
only enabled when all devices on the wireless network are
configured with Super G with Dynamic Turbo enabled.
Select
On
or
Off
.
Standard 80.11g support, no enhanced capabilities.
Radio: