Wireless Controller
CLI Reference Guide
47
8.22 wlan client delete <macaddr>
S.No
Com mand Nam e
Description
Type and Description
1
<macaddr>
w lan client configuration mode
MAC address
AA:BB:CC:DD:EE:FF w here
each part is in the range 00-
FF
8.23 wlan global dist_tunnel configure
S.No
Com mand Nam e
Description
Type and Description
1
save
Save Distributed Tunneling settings.
2
exit
Save Distributed Tunneling settings and exit
current mode.
3
cancel
Roll back Distributed Tunneling settings
changes.
4
max_clients
Enter maximum client connections supported.
Unsigned integer
5
idle_timeout
Enter idle timeout value in seconds.
Unsigned integer
6
max_timeout
Enter maximum timeout value in seconds
Unsigned integer
7
mcast_reply
Enter maximum multicast relplications
allow ed.
Unsigned integer
8.24 wlan global snmp_trap configure
S.No
Com mand Nam e
Description
Type and Description
1
save
Save SNMP Trap settings.
2
exit
Save SNMP Trap settings and exit current
mode.
3
cancel
Roll back SNMP Trap settings changes.
4
ap_failure
Enable/Disable SNMP traps for AP
association/authentication failures.
Boolean choice
5
ap_state
Enable/Disable SNMP traps for AP state
changes.
Boolean choice
6
client_failure
Enable/Disable SNMP traps for client
association/authentication failures.
Boolean choice
7
client_state
Enable/Disable SNMP traps client state
changes
Boolean choice
8
peer_w s
Enable/Disable SNMP traps for peer w lan
sw itch events.
Boolean choice
9
rf_scan
Enable/Disable SNMP traps for RF scan
related events.
Boolean choice
10
rogue_ap
Enable/Disable SNMP traps for rogue access
points.
Boolean choice
11
tspec
Enable/Disable SNMP traps for TSPEC
related events.
Boolean choice
12
w ids_status
Enable/Disable SNMP traps for WIDS status
events.
Boolean choice
13
w s_status
Enable/Disable SNMP traps for w s status
events
Boolean choice
8.25 wlan global configure
S.No
Com mand Nam e
Description
Type and Description