DVG-7022S/7044S/7062 User’s Manual
Telephony Settings
y
Trunk Hunting Order
: To set FXO dial-out mode when there is an incoming call dialed FXO representative
number.
First Idle
: The gateway will assign each unassigned call from first FXO line.
Sequential
: The gateway will automatically assign the first unassigned call to the first FXO line. The second
FXO line will dial the second unassigned call out. Each line will be used.
y
Enable FXO/Trunk Extension Number
: Select this function only when FXO receives 2 or more different
PBX or PSTN, or under special circumstances. Users are free to call out from a desired channel, if assigned.
If you register to a Proxy it MUST be checked.
y
Pick up Line by Dialing Extension Number
: Allows user to dial just the FXO extension – 717 - to use
when the PSTN line is connected on the FXO port. If you are registered to a Proxy, it MUST be checked.
y
Wait for Caller ID before FXO / Trunk pick up
: To detect caller ID from FXO port.
y
Transit in Busy Tone Limit:
The duration gateway plays a busy tone before FXO hook-on. To notify the
caller from PSTN that this call is finished.
y
Detect FXO Line Presence:
Enable this function to detect the line presence that FXO port is connected to
PBX or a PSTN line. Untick the check box to disable this function if it mis-detect line presence on FXO port
while ringing.
y
Ring (Early Media) Time Limit[10 - 600secs]
：
The timeout to cancel a call when no one answers.
y
Enable End of Digit Tone
：
The gateway will play a “Beep-Beep” tone to notify that the call is in progress.
D-Link Systems, Inc.
24
