D-Link DSN-3200 - xStack Storage Area Network Array Hard..., Быстрое руководство по установке

Страница: 2 / 24

2 3
Quick Installation Guide
DSN-3200/DSN-3400
DSN-3200/
DSN-3400
CD ROM
If any of the items are missing, please contact your reseller.
iSCSI SAN ARRAy wIth 15 SAtA BAyS
Package Contents
Power
cables
Keys screws
Connect to DSN Series SAN Array
C. the management port can be connected to the server either by directly attaching a crossover cable,
or via a switched infrastructure using a standard Ethernet cable. Facing the rear of the SAN array, the
management port is on the right side of the I/O panel. By default, this port is set to the IP address of
192.168.1.1 . this can be changed using the web based wizard.
A. to install the hard drives:
Place the hard drives into the drive trays and secure with mounting screws on the drive trays. then
gently insert the assembled drive trays into the enclosure until the latch clicks.
B. DSN-3200 :
Attach an Ethernet cable to 1GbE data port 0 on the rear panel and to your server or SAN switch.
Facing the rear of the SAN array, the data ports are on the left side. to connect additional data ports
to your SAN array, repeat this step using another Ethernet cable and the next data port.
DSN-3400 :
Attach a XFP transceiver with a single or multi mode optical fiber cable to the XFP host network
port on the rear panel and to your server or SAN switch. Facing the rear of the SAN array, the host
network port is on the left side.
host Network Connections
Diagnostic Port
Mgmt
Ethernet
Rack mount
slide rails
Console
cable
Diagnostic Port
Mgmt
Ethernet
host
Network
Rx/Link